Task Force 227684 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 19

Task Force 227684 Скачать руководство пользователя страница 8

Figure1

Figure 2

WARNING:

The handle insulators are not only used to adjust handle height, but are

also a safety device and should never be altered in any way.

4

Tighten the hand knobs on each side of the handle. Make sure that the carriage bolts are seated properly into

the handle insulators.

5

Using pliers, squeeze one leg of the lower handle against the handle mounting bracket. Insert the

hairpin clip into the inner hole on the weld pin.

6

Repeat on the other side. Make certain all nuts and bolts are tightened securely.

INSTALLING THE CHARGE CHUTE

y

Pull out the key, and wait for blade to come to a complete stop.

y

Open mulch door by pulling on the mulch door finger grip.

y

Align the discharge chute arrows with the positioning arrows on
the lawnmower deck and insert the discharge chute.

y

Position the chute until the chute hooks are trapped under the
deck hooks and release the chute and door.

WARNING:

Never operate the mower without the proper trail shield, mulch plug,

side discharge deflector, motor/blade control or other safety devices in place and
working. Never operate the mower with damaged safety devices. Failure to do so can
result in personal injury.

Lower handle

Knob

Upper handle

8

«
...
6
7
8
9
10
...
»

Содержание 227684




















Отзывы:

Нет отзывов