6 − Recording
TASCAM SS-R1
Using the sampling rate converter
The SS-R1 contains a built-in sampling rate converter,
allowing you to record at a sampling rate that is different
than the sampling rate of the digital input source.
Use the menu to turn the sampling rate converter (SRC) on/
off (for details on menu operations, refer to “Operations in
the menu screens” on page 16).
1 Press the
MENU
key to access the main menu list
screen.
2 Select the REC menu.
3 Highlight the PREFERENCE item.
4 Press the front panel
˚
key (or the remote’s
CURSOR
¥
key) to proceed to the REC PREF-
ERENCE screen.
5 Select SRC.
6 Turn the
MULTI JOG
dial (or use the remote’s
CURSOR
§
, ¶
keys) to turn the SRC setting
ON
/
OFF
.
7 When you’ve finished making the setting, press
the front panel
TIME (ESC)
key (or the remote’s
CLR/ESC
key) to return to the home screen.
NOTE
If a digital signal whose sampling rate differs from
the sampling rate specified in the REC FORMAT
item is being received at the DIGITAL IN jack, and
you attempt to record with SRC off, an error
message (
FS UNMATCH
) will appear.
The sampling rate setting is remembered even
when the power is turned off.
•
•
Monitoring the input signal
When you press the
READY
key to enter the record-ready
condition, the front panel
RECORD
key and
READY
key
will light, and the input signal will be output from the SS-
R1’s various output jacks (headphone, analog balanced,
analog unbalanced, and digital). The meter in the home
screen will indicate the input level.
READY key
RECORD key
STOP key
To cancel the record-ready condition, press the
STOP
key.
TIP
If you simply want to monitor the input signal
without intending to record anything, press the
RECORD
key without a CompactFlash card insert-
ed. The display will indicate
MONITOR
, and the
RECORD
key will blink red.
To stop monitoring the input signal, press the
STOP
key.
•
•
