Tascam Mixcast 4, Справочное руководство

Страница: 38 / 48

9 - Error messages
The following is a list of pop-up messages that are shown when errors occur.
Refer to this list if one of these pop-up messages appears on the this unit and you want to check the meaning or determine a proper response.
Message Meaning and response
Invalid Card
Change Card Something might be wrong with the card.
Change the card.
Protected Card
Change Card
The SD card is write-protected.
Disable SD card write-protection.
Protected Card
MBR ERROR
Init CARD
Are you sure?
The SD card is not formatted properly or the card is broken. Change the SD card, or press the OK
button while this message is being shown to format the card. Formatting will erase all the data on
the SD card.
Format Error
Format Card
Are you sure?
No Card
No SD card is loaded. Insert a recordable SD card.
Music Not Found
Are you sure?
The file cannot be found or the file may be damaged.
Check the relevant file.
File Not Found
File Not Found
Make Sys File
Are you sure?
A system file required to use this unit is missing.
A necessary system file might also be invalid.
If this message appears, press the OK button to create a system file.
Invalid SysFile
Make Sys File
Are you sure?
Write Timeout
Writing to the SD card timed out and recording stopped.
SD card writing performance has become worse.
Execute the erase format function or change the SD card.
Write error
REC continue Writing to the SD card timed out.
This has caused audio to be interrupted and noise to occur.
File Number Full
The total number of folders and files exceeds the limit of 5000.
Delete unnecessary folders and files or move them to a computer.
Card Full The SD card has no remaining capacity.
Max File Size Recording stopped because the recording time reached 24 hours.
File Name Error The file name is either invalid or too long. Change the file name.
Duplicate File Name A file with the same name already exists. Change the file name.
Card Error
FATAL
The SD card cannot be recognized properly. Replace the SD card.
MARK FULL The number of marks has reached the limit of 99.
No USB Connection The recording button was pressed when there was no USB connection and SD REC was set to off.
System Rom Error
If any of these errors occurs, turn the unit off and restart it.
If these error messages continue to appear frequently, please contact the store where you pur-
chased this unit or TASCAM customer support service.
Initialize error
Are you sure?
Not Continued
File Error
Writing Failed
Player Error
System Error XX
FATAL
(XX is a number.)
Can't Enter
38
TASCAM Mixcast 4