Tascam Mixcast 4, Справочное руководство

Страница: 29 / 48

8 - Touchscreen Functions
When done making settings on the first page of the Tone Manual
Setting Screen, tap the [>] button at the bottom of the screen to
open the second page (Exciter).
o
Tone Manual Setting Screen page 2 (Exciter)
Tone Manual Setting Screen page 2 (Exciter)
o
Reset
Tap this to restore changed settings to default values.
o
Bypass
Tap to bypass tone adjustments.
o
Enable switch
Tap this to enable the Exciter settings that have been set.
Use the slider and the [-] and [+] buttons to adjust the levels of
the following setting values.
o
Frequency
Switch to Highshelf (high frequency) or Lowshelf (low fre-
quency), and set each frequency.
o
Ratio
This sets the frequency ratio.
o
Gain
This adjusts the input level.
o
Compressor Manual settings
This shows the Compressor Manual Setting Screen.
Compressor Manual Setting Screen
o
Reset
Tap this to restore changed settings to default values.
o
Bypass
Tap to bypass compressor adjustments.
Use the slider and the [-] and [+] buttons to adjust the levels of
the following setting values.
o
Threshold
This sets the base value for compression.
o
Ratio
This sets the compression ratio.
o
Attack
This sets the time before compression starts.
o
Release
This sets the time until compression stops.
o
Gain
Use this to adjust the MIC INPUT input level.
o
De-esser manual settings (MIC)
This shows the De-esser Manual Setting Screen.
De-esser Manual Setting Screen
o
Reset
Tap this to restore changed settings to default values.
o
Bypass
Tap to bypass de-esser adjustments.
Use the slider and the [-] and [+] buttons to adjust the levels of
the following setting values.
o
Threshold
This sets the base value for input.
o
Frequency
This sets the frequency used for de-essing.
o
Noise suppressor settings (MIC)
The Noise Suppressor Setting Screen has two pages.
(Tap the [>] button at the bottom of the Noise Suppressor Setting
Screen to switch to the second page.)
The first page of the Noise Suppressor Setting Screen is shown first.
o
The following settings can be made on the first page of the Noise
Suppressor Setting Screen.
Noise Suppressor Setting Screen page 1
o
Reset
Tap this to restore changed settings to default values.
o
Bypass
Tap to bypass Noise Suppressor adjustments.
Use the slider and the [-] and [+] buttons to adjust the levels of
the following setting values.
o
Low Cut Filter Frequency
The sets the low-frequency at which noise is suppressed.
o
Noise Gate Attenuate
This sets the level that reverberation noise is attenuated.
TASCAM Mixcast 4
29