Tascam DR-701D, Справочное руководство

Страница: 5 / 46

TASCAM DR-701D
5
1 – Introduction
Trademarks
• TASCAM is a trademark of TEAC CORPORATION, registered
in the U.S. and other countries.
• The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in United States and
other countries.
• The SDXC logo is a trademark of SD-3C, LLC.
• Blackfin® and the Blackfin logo are registered trademarks of
Analog Devices, Inc.
• Other company names, product names and logos in this
document are the trademarks or registered trademarks of
their respective owners.
Information is given about products in this manual only
for the purpose of example and does not indicate any
guarantees against infringements of third-party intel-
lectual property rights and other rights related to them.
TEAC Corporation will bear no responsibility for infringe-
ments on third-party intellectual property rights or other
liabilities that occur as a result of the use of this product.
Properties copyrighted by third parties cannot be used
for any purpose other than personal enjoyment and
the like without the permission of the right holders
recognized by copyright law. Always use this equipment
properly.
TEAC Corporation will bear no responsibility for rights
infringements committed by users of this product.
About SD cards
This unit uses SD cards for recording and playback.
It can use 64MB–2GB SD cards, 4–32GB SDHC cards and
48–128GB SDXC cards.
A list of SD cards that have been confirmed for use with this unit
can be found on the TEAC Global Site (http://teac-global.com).
You can also contact TASCAM customer support for information.
Precautions for use
SD cards are delicate media. In order to avoid damaging SD
cards, please take the following precautions when handling
them.
• Do not leave them in extremely hot or cold places.
• Do not leave them in extremely humid places.
• Do not let them get wet.
• Do not put things on top of them or twist them.
• Do not hit them.
• Do not remove or insert them during recording, playback,
data transmission or other access.
• When transporting them, put them into cases, for example.