Tascam DR-701D, Справочное руководство

Страница: 18 / 46

18
TASCAM DR-701D
3 – Preparation
Connecting monitoring equipment
To listen with headphones, connect them to the PHONES jack.
Headphones
To listen with an external monitoring system (powered monitor
speakers or an amplifier and speakers), connect it to the LINE
OUT jack on the right side of the unit.
Powered monitor
speakers
or amplifier and
speakers
Adjusting the playback volume
8
Adjusting the PHONES jack volume output
Use the PHONES volume control to adjust the volume output
from the PHONES jack.
8
Adjusting the OUT jack volume output
1. On the
OUTPUT LEVEL
page, select the
CAMERA
item.
(see “Menu operation procedures” on page 12)
2. Set the volume output from the OUT jack.
Range:
-24dB
–
+42dB
(default:
0dB
)
3. When finished, press the MENU button to return to the
Home Screen.
CAUTION
Hardware gain switching occurs at 3 points: between 0 dB
and 1 dB, between 12 dB and 13 dB, and between 30 dB and
31 dB. A pop-up message will appear before gain switching.
You can continue turning the DATA dial to change the
setting, but a brief gap will occur in the output audio during
gain switching.
8
Adjusting the LINE OUT jack volume
1. On the
OUTPUT LEVEL
page, select the
LINE
item. (see
“Menu operation procedures” on page 12)
2. Set the volume output from the LINE OUT jack.
Range:
-12dB
–
+12dB
(default:
0dB
)
3. When finished, press the MENU button to return to the
Home Screen.
CAUTION
Hardware gain switching occurs between 0 dB and 1 dB.
A pop-up message will appear before gain switching. You
can continue turning the DATA dial to change the setting,
but a brief gap will occur in the output audio during gain
switching.