DM-3200 Release Notes
TASCAM DM-3200 Release Notes V1.50
Meter over-level settings
In the
METER/FADER>METER
screen, you can now make
fine adjustments to the point at which the over-level indica-
tor will light in order to match other equipment present in
your system.
Figure 12 METER/FADER>METER screen
Use the
POD 2
knob to select one of the following as the
point at which the over-level indicator will light.
-0.20, -0.17, -0.13, -0.10, -0.06, -0.03
Cursor location when a multi-control
screen is displayed
The cursor location will now move to the module selected
by the
SEL
key when you display a multi-control screen
such as the AUX1-2 screen.
ª
ª
MUTE Clear function has been added
By holding down the
SHIFT
key or
CTRL
key and press-
ing a
MUTE
key, you can now defeat muting for all chan-
nel modules.
SHIFT
key +
MUTE
key: Defeat muting for the currently
selected channel layer
CTRL
key +
MUTE
key: Defeat muting for all channel layers
This function does not work for master modules such as
BUSS, AUX, or STEREO.
NOTE
Solo can be cleared in a similar way.
ª
When you write the current channel during an automation
write rehearsal, the automation status area in the upper
part of the LCD will now indicate [
WR-RHS
], indicating
that rehearsal is occurring
Automation WR-RHS indication has been added
About remote control
Use P2 protocol to remotely control the
X-48
You can now use P2 protocol to control the transport of the
X-48.
In the supported devices area of the
REMOTE>MACHINE
CTRL
screen, choose
MM/MX-24/X-48
.
ª
Figure 13
REMOTE
>MACHINE CTRL screen
You can specify
1-48
as the REC Function.