Tascam DM-3200 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 26

Tascam DM-3200 Скачать руководство пользователя страница 7

DM-3200 Release Notes

TASCAM DM-3200 Release Notes V1.50

MIDI control change message support

for mixer parameters

MIDI control change messages are now supported, allow-
ing mixer parameters (

FADER

,

PAN

, and

MUTE

) to be

controlled.

This allows MIDI devices to be controlled in synchroniza-
tion with operations on the DM-3200 mixer, or conversely
for mixer parameters to be controlled from a MIDI device.

In the

MIDI>CtrlChg MIX

. screen, the

CONTROL CHANGE TABLE

FOR MIXER

allows you to assign control change numbers.

Figure 8 MIDI>CtrlChg MIX screen

By using

BATCH SETUP

you can make settings for all

sixteen channels at once.

MIDI>SETUP screen filtering

In conjunction with MIDI control change support for mixer
parameters, filtering has been added to the USB MIDI 4:
PC/CC port.

Figure 9 MIDI>SETUP screen

Until now, the input/output on/off setting for USB MIDI port
3 (used for MIDI time code) had been a single setting for
input and out put, but these can now be set independently.

ª

ª

MIDI Device Inquiry message support

When an identity request is received from the following
MIDI ports of external device, the following message iden-
tify reply is transmitted.

F0 7E 00 06 02 4E 07 01 00 06 v1 v2 pp 00 F7

  v1: Major version number of firmware
  v2: Minor version number of firmware
  pp: MIDI port ID
    00: The DM-3200

’

s MIDI IN/OUT

    04: USB MIDI 4: PC/CC port
    05: USB MIDI 5: USB REMOTE 1 port
    06: USB MIDI 6: USB REMOTE 2 port

MIDI

«
...
5
6
7
8
9
...
»

Содержание DM-3200



























Отзывы:

Нет отзывов