Tascam DM-3200 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 26

Tascam DM-3200 Скачать руководство пользователя страница 25

DM-3200 Release Notes

TASCAM DM-3200 Release Notes V1.50

When making REC function settings with multiple DTRS
devices connected, and the REC function of track 9 or later
is operated from the DTRS unit, that status is not reflected
in the mixer.

DTRS REC FUNCTION setting when controlling via P2

Auto detection of MMC control target

When loading a project that includes MMC Full (closed-
loop) control, be sure to connect and power on the MMC

device first. Also, power on the MMC device before start

-

ing the mixer, otherwise the MMC device may not be

correctly identified or controlled.

Known Issues in V1.50

Known Issues

This section describes the Known Issues for the latest DM-3200 software

Updating the firmware on a cascaded mixer

When updating the firmware on a cascaded mixer, first

disconnect the cascade cable.

USB Connection notes

Mac OS X:

If TMC or your DAW software fails to find your
mixer after putting your computer into Sleep mode,
please remove the USB cable and re-connect it before
re-launching TMC or your DAW software.

Windows XP:

If TMC or your DAW software fails to find your mixer after
putting your computer into Standby mode or Hibernation
mode, please re-launch TMC or your DAW software.

Windows Vista:

If TMC or your DAW software fails to find your mixer
after putting your computer into Standby mode, Sleep
mode or Hibernation mode, please re-launch TMC or your
DAW software again.

To prevent this problem re-occuring, please set your
computer to not automatically go into Standby or
Hibernation modes.

«
...
23
24
25
26
»

Содержание DM-3200



























Отзывы:

Нет отзывов