Tascam Celesonic us-20x20, Справочное руководство

Страница: 7 / 44

TASCAM US-20x20
7
3 – Installation
Installing the Windows driver
CAUTION
•
Complete installation of the Windows driver on the
computer before connecting the unit to it with the USB
cable.
•
If you already connected the unit to the computer using
the USB cable before installing the Windows driver and the
Found New Hardware Wizard launched, close the message
and disconnect the USB cable.
8
Windows driver installation procedures
1. Download the latest Windows driver for the operating
system you are using from the TEAC Global Site (http://
teac-global.com/) and save it on the computer to be used
with the unit.
2. Open the saved Windows driver (zip file) on, for example, the
computer desktop.
3. Double-click the “US-20x20_Installer” file in the folder that
appears after uncompression to automatically launch the
installation software.
CAUTION
If you open a zip file without uncompressing it and double-
click the “US-20x20_Installer.exe” file in the folder that
opens, installation will not start. Right-click the zip file and
select “Extract All", for example, to uncompress it and then
try again.
4. When a “Security Warning” or “User Account Control” screens
appear, click the “Yes” button.
5. When the InstallShield Wizard screen appears, click the “Next
(N)” button.
6. Read the contents of the License Agreement, and select
“Agree (A)” if you agree to the terms. Then, click the “Next
(N)” button.
7. Click the “Install (I)” button.
8. Next, click the “Install (I)” button to start installation.
9. The following screen appears when installation has
completed.
Click the “Finish (F)” button.
The installer will quit and the Windows Settings Panel will
launch.
NOTE
After installing the driver, the device driver will be installed
the first time the unit is connected by USB. At this time,
Windows will automatically search Windows Update, and
it may take some time to recognize the unit connection.
If the unit is still not recognized after some time, open the
software installation screen from the message area at
the bottom right of the computer display, and click “Skip
Obtaining Drivers From Windows Update” to cancel the
search.