Tascam Celesonic us-20x20, Справочное руководство

Страница: 23 / 44

TASCAM US-20x20
23
6 – Using the Settings Panel
NOTE
The same signals are output from the PHONES 1 and
PHONES 2 jacks as the output signals selected in the output
signal selection area for LINE OUT 1 and LINE OUT 2 .
3
Status display area
This shows the connections between the signals selected
in the output signal selection area (
2 ) and the output
connectors.
Using the Settings Panel View menu
Use the View menu in the menu bar to reset the Settings
Panel and reverb settings to their original values, as well as to
minimize the Settings Panel.
Windows version
Mac version
8
Initialize
Select this to reset all settings in the Settings Panel.
See “Initializing the Settings Panel” on page 23 for details.
8
Initialize Reverb
Select this to reset the settings in REVERB area on the
“MIXER” page.
See “Resetting the reverb settings” on page 24 for details.
8
Minimize
This minimizes the Settings Panel software to the Windows
Taskbar or Mac Dock.
8
Close
Close the Settings Panel and quit/exit the software.
Initializing the Settings Panel
You can reset all settings in the Settings Panel.
NOTE
The items on the “INTERFACE” page cannot be initialized.
CAUTION
After resetting, you cannot restore the previous settings.
1. In the menu bar, open the View menu (Windows/Mac), and
click “Initialize”.
The following confirmation message will appear.
Windows version
2. Click the “OK” button in the message window to reset the
Settings Panel settings to their default values.
The items reset are as follows.
“MIXER” page items
o
EQUALIZER area settings: all initialized
o
COMPRESSOR area settings: all initialized
o
REVERB area settings: all initialized
o
PHASE buttons (all channels): off
o
EQ buttons (all channels): off
o
COMP buttons (all channels): off
o
Effect AUX selection buttons: off
o
AUX 1–4 knobs (all channels): inf
o
SOLO buttons (all channels): off
o
MUTE buttons (all channels): off
o
Pan sliders (all channels): center (C)
o
Channel faders (all channels): −infinity
o
LINK buttons (all channel pairs): off
o
REVERB buttons: on
o
RETURN knob: inf
o
AUX MASTER 1/REVERB knob: 0
o
AUX MASTER 2–4 knobs: 0
o
STEREO MASTER fader: −infinity
The following “OUTPUT SETTING” page items when the unit
is in AUDIO I/O mode
o
LINE OUT 1: COMPUTER 1
o
LINE OUT 2: COMPUTER 2
o
LINE OUT 3: COMPUTER 3
o
LINE OUT 4: COMPUTER 4
o
LINE OUT 5: COMPUTER 5
o
LINE OUT 6: COMPUTER 6
o
LINE OUT 7: COMPUTER 7
o
LINE OUT 8: COMPUTER 8
o
LINE OUT 9: COMPUTER 9
o
LINE OUT 10: COMPUTER 10
o
COAX L: COMPUTER 11
o
COAX R: COMPUTER 12
o
OPT 1: COMPUTER 13
o
OPT 2: COMPUTER 14
o
OPT 3: COMPUTER 15
o
OPT 4: COMPUTER 16