Targa Nettop NT9231, Руководство пользователя и сервисная информация

Страница: 36 / 89

English
NetTop PC
35
Mounting the PC
ATTENTION: The NetTop PC may only be operated when it is mounted
on the pedestal or on the monitor, never when it is lying down. Otherwise
there is a risk that the NetTop PC will be damaged.
On the pedestal
If you want to mount the PC on the pedestal, proceed as follows:
1. Place the PC (1) on the pedestal (2) as
shown in the diagram.
2. Screw the knurled screw (3) in tight.
On the monitor
If you want to mount the PC on the rear of a monitor with a VESA support
bracket, proceed as follows:
1. Attach the VESA support bracket (1) with
four screws (2) included in delivery.
The knurled screw (3) must be at the bot-
tom! If your monitor has a VESA hole
spacing of 75 mm, then use the inner
boreholes (2); if the hole spacing is
100 mm, then use the outer boreholes
(2*).
2. Place the PC (4) in the support bracket
(1) as shown in the diagram.
3. Screw the knurled screw (3) in tight.