41
Binding
Fault
Possible cause
Remedy
*
Binding does not
work when bale is
finished
*
Binding is not set in correct initial
position
*
Insufficient lubrication
*
Wrong adjustment of tensioned
spring
*
Twine is coming off from twine
pulley
*
Twine is tangled or caught
*
Lower density in bale left side
*
Binding arm does not rise up after
coming off latch
*
Twine tip does not come in chanber
*
Adjustment in according with”1-4-5
Method of twine treading”
*
Lubrication
*
Adjustment in
accordance with”5-2-3
Adjustment of twine tension”
*
Adjustment in accordance with”1-4-4
Method of twine threading”
*
Remove tangle and catch of twine
*
Supply of larger quantity of material to
left side of the machine.
*
Lubrication and adjustment of falling
speed by double nuts.
*
Adjust falling down speed of twine
arm not to be ahead of twine falling.
*
Remove obstruction and let twine tip
into chamber.
Wipe off part of machine.
*
Binding device
work before
reaching to setting
density
*
Binding is not set in correct initial
position
*
Longer leading twine length
because of dull blade
*
Adjustment in accordance with”1-2-4
Method of twine threading”
*
Replacement of blade and adjustment
of leading twine length in accordance
with”1-4-4 Method of twine threading”
*
Twine comes off
from bale
*
Twine is not cut
smoothly
*
Fewer twine binding number
*
Twine tension is too loose
*
Adjustment in accordance with” 3-2-2
Adjustment of twine binding number”
*
Tighten nylon nuts of twine tension
plate one or two turns.
Содержание SRB-870
