TapFlo DT Series, Оригинальная инструкция

Страница: 6 / 35

0. GENERAL
IOM manual active pulsation dampeners
6
0. GENERAL
0.1. Introduction
The active pulsation dampener is the most efficient way to remove pressure variations on the
discharge of the pump. The Tapflo pulsation dampener works actively with compressed air and
a diaphragm, automatically setting the correct pressure to minimize the pulsations. The
pulsation dampener is available for all Tapflo pump sizes and material versions.
With proper attention to maintenance, Tapflo active pulsation dampeners will give efficient and
trouble free operation. This instruction manual will familiarize operators with detailed
information about installing, operating and maintaining the dampener.
0.2. Warning symbols
The following warning symbols are present in this instruction manual. This is what they say:
This symbol stands next to all safety instructions in this instruction manual where
danger to life and limb may occur. Observe these instructions and proceed with
utmost caution in these situations. Inform also other users of all safety instructions.
In addition to the instructions in this instruction manual, the general safety and
accident prevention regulations must be observed.
This signal stands at points in this instruction manual of particular importance for
compliance with regulations and directives, for correct work flow and for the
prevention of damage to and destruction of the complete dampener or its
subassemblies.
0.3. Qualification and training of personnel
The personnel in charge of installation, operation and maintenance of the dampener we produce
must be qualified to carry out the operations described in this manual. Tapflo shall not be held
responsible for the training level of personnel and for the fact that they are not fully aware of
the contents of this manual.
In case any instructions in this manual are unclear or any information is lacking, please contact
Tapflo before handling the dampener.