TapFlo DT Series, Оригинальная инструкция

Страница: 34 / 35

6. WARRANTY
IOM manual active pulsation dampeners
34
4. The warrantee shall cover the replacement or repairing of any parts, which is documented
faulty due to construction or assembling, with new or repaired parts free of charges
delivered by Tapflo. Parts subjected to normal tear and wear shall not be covered by the
warranty. Tapflo shall decide as to whether the defective or faulty part shall be replaced
or repaired.
5.
The warrantee of the products shall be valid for a period in accordance to the current law
from the date of delivery, under the condition that notice of the alleged defect to the
products or parts thereof be given to Tapflo in written within the mandatory term of 8
days from the discovery. Repair or replacement under the terms of this warranty shall not
give a right to an extension to, or a new commencement of, the period of warranty.
6. Repair or replacement under the terms of this warranty shall not give a right to an
extension to, or a new commencement of, the period of warranty. Repair or replacement
under the terms of this warranty may be fulfilled with functionally equivalent
reconditioned units. Tapflo qualified personnel shall be solely entitled to carry out repair
or replacement of faulty parts after careful examination of the dampener. Replaced faulty
parts or components will become the property of Tapflo.
7.
The products are built in accordance with standard CE normative and are tested (where
appli
cable) by Tapflo. Approval and tests by other control authority are for the customer’s
account. The products shall not be considered defective in materials, design or
workmanship if they need to be adapted, changed or adjusted to conform to national or
local technical or safety standards in force in any country other than that for which the
unit was originally designed and manufactured. This warranty shall not reimburse such
adaptations, changes or adjustments, or attempt to do so, whether properly performed
or not, nor any damage resulting from them, nor any adaptation, change or adjustments
to upgrade the products from their normal purpose as described in the products operative
manual without the prior written consent of Tapflo.
8.
Installation, including electric and other connections to utility mains according to Tapflo
drawings, is for the cost and responsibility of the customer, unless otherwise agreed in
writing.
9. Tapflo will not be liable on any claim, whether in contact, tort, or otherwise, for any
indirect, special, incidental, or consequential damages, caused to the customer or to third
parties, including loss of profits, arising by any possible infringement of par. 3 above or
by the customer or third parties being in the impossibility of using the products.
Steady the above, Tapflo liability to the customer or third parties from any claim, whether in
contract, tort, or otherwise, shall be limited to the total amount paid by the customer for the
product that caused the damages.