TapFlo DT Series, Оригинальная инструкция

Страница: 16 / 35

3. MAINTENANCE
IOM manual active pulsation dampeners
16
Fig. 3.5.5
Take the pin screws [14] out of the dampener
housing [11].
Fig 3.5.6
Unscrew the diaphragm [15] by hand (clockwise).
Fig 3.5.7
Using an Allen key, unscrew the shaft ending
[1652] from the diaphragm.
Fig 3.5.8
Push out the shaft [1651] from the dampener
housing
Fig 3.5.9
Check the inner seals [36] and O-rings [47]. If
necessary, take them out using a screwdriver.
NOTE! If these parts are removed, they must be
replaced with new ones. If the dampener sealing
is worn, also check the shat for wear and if
necessary replace it.
The dampener is now completely disassembled. Check all components for wear or damage
and replace if necessary.