T&R 200A-3PH mk2, Руководство по эксплуатации и техническому обслуживанию

Страница: 27 / 48

27
Enter Accept the current comment.
Esc Lose the changes made to the comment since entering comment mode and
revert to the last comment entered.

(backspace) Delete the character to the left of the cursor.
Del Delete the character under the cursor.

(cursor right) Move cursor one character to the right.

(cursor left) Move cursor one character to the left.
Shift+

Move cursor to end of comment.
Shift+

Move cursor to start of comment.
End Move cursor to end of comment.
Home Move cursor to start of comment.
The following keys have no effect: caps lock, shift lock, alt, Windows key, tab,

,

, page
up/down, F1-F12.
1.5.1.4 Auto-store
Set the STORE RESULTS switch to AUTO-STORE.
Set TIMER MODE to internal start, 1 contact, 2 contacts, current operated or aux ac.
A result record is added to the current result file whenever the timer stops (this includes when
the output is switched off in internal start mode).
If results are to be stored not dependant on the timer, set the timer mode to internal start, and
press the OFF button for the main output when a result is to be stored.
Results are not stored when the timer is set to OFF. This allows the output current to be set
without storing any results to the output file.
The example below shows data stored when testing a relay.
"200A-3PH mk2 ","V2.09 C03","2.01","P1","A1"
"Time","Date","Main A","Timer","Aux A","Aux V","Phase","Freq Hz","Aux Range","Comment"
"11:18:40","27/01/13","2.38","7.961","0.000","0.0","0.0","0.00","6","CDG11 relay"
"11:18:49","27/01/13","3.73","5.252","0.000","0.0","0.0","0.00","6","CDG11 relay"
1.5.1.5 Waveform storage
Waveform storage mode allows the main output current and auxiliary input waveform to the
USB memory key as a CSV file.
Set the STORE RESULTS switch to WAVE.
Set TIMER MODE to internal start, 1 contact, 2 contacts or current operated.
The waveform is stored to the memory key whenever the timer stops or the output is switched
off. It takes a number of seconds to write the waveform data to the memory key. Please be
patient while the unit finishes writing the data.