OPERATORS MANUAL
TT1200 MPEG2-DVB PROFESSIONAL DECODER
PAGE 18
TANDBERG TELEVISION ASA, Philip Pedersensvei 20, PO Box 322, N-1324 Lysaker, Norway
Tel: +47 67 11 62 00, Fax: +47 67 11 62 01
3.6.1 ALARM Connector
If an alarm condition occurs, the alarm relay will be activated after a delay specified in the
System
options
⇒
Alarm delay
menu entry. The pinning of the connector is given in
Figure 8. If an alarm occours, pin no. 8 will be activated.
The TT1200 handles various status messages from different parts of the system. The current overall
status of the decoder can be directly read from the ‘sleep display’. A more detailed list of possible
alarm conditions can be found in the
Advanced
⇒
Status Setup
menu. The different status
messages are configurable to represent an alarm condition, a warning or a no-condition, see section
5.4.5.3. If one of the currently present status messages represent an Alarm condition, the alarm relay
will be set.
