background image

OPERATORS MANUAL
TT1200 MPEG2-DVB PROFESSIONAL DECODER

PAGE 60

TANDBERG TELEVISION ASA, Philip Pedersensvei 20, PO Box 322, N-1324 Lysaker, Norway

Tel: +47 67 11 62 00, Fax: +47 67 11 62 01

TV Channel Status Messages

The TV channel extracts the required TS information from the transport stream. If there is anything
wrong, the status messages available can help with the diagnosis. Also conditional access status used to
descramble the active TV service is available here.

Smart Card Messages
6&QRWSUHVHQW

There is no smart card present in the smart card reader

6&EDGUHVSRQVH

The smart card does not respond properly to your commands

6&QRUHVSRQVH

The smart card does not respond at all. May be inserted upside down

CA service definition
messages
9,'QRDFFHVV

The smart card has no access for the video stream

$8'QRDFFHVV

The smart card has no access for the audio stream

77;QRDFFHVV

The smart card has no access for the teletext stream

9%,1RDFFHVV

The smart card has no access for the VBI stream

CAM messages

CAM: Services full

The CAM modules has too many services to descramble (4 channels maximum)

CAM: EEPROM invalid

EEPROM contents of CAM is not valid

CAM: No CAT receiv

The received signal gives no Conditional Access Table information (PSI)

CAM: Upd. CAM EEPROM

The Irdeto CAM is updating its EEPROM contents (Please wait)

CAM error???

CAM has returned unknown error code

9,'UHVEORFNHG

No access to video

$8'UHVEORFNHG

No access to audio

77;UHVEORFNHG

No access to teletext

9%,5HVEORFNHG

No access to VBI

Transport stream error
messages
2XWRIV\QF

There is no signal (transport stream) coming into the TV Channel

9,'1RWXVHG

No video stream found for selected service.

$8'1RWXVHG

No audio stream found for selected service.

77;1RWXVHG

No teletext stream found for selected service.

9%,1RWXVHG

No VBI stream found for selected service.

(55LQ9,'VWU

Error in video stream means that there are coding errors in the stream or the stream is no
video stream

(55LQ$8'VWU

Error in audio stream means that either the stream is not present or the bit stream itself is
erroneous

(55LQ77;7VWU

Error in Teletext stream means that the stream is either not present or is not a teletext stream

(55LQ68%7VWU

Error in subtitle stream means that the stream is either not present or is not a subtitling page

(55LQ$8;GDWD

Error in auxiliary data stream means that the auxiliary data format is not what was expected.
(Manual/Special data)

(55,Q9%,VWU

Error in VBI stream means that the stream is either not present or is not a VBI str

2XWSXW1RW8VHG

This means that there is no service-id selected for the channel output (Select Service)

3$7QRWSUHVHQW

PAT (Program Association Table) is not present in the transport stream.

307QRWSUHVHQW

PMT (Program Map Table ) for the selected service is not present in the transport stream

1,7QRWSUHVHQW

NIT (Network Information Table) is not present in the current transport stream

6'7%$7QRWSUHVHQW

SDT(Service Description Table) and BAT (Boquet Association Table) is not present in the
current transport stream

&$7QRWSUHVHQW

CAT (Conditional Access Table) is not present in the transport stream.

7'7QRWSUHVHQW

TDT (Time and Date Table) is not present in the transport stream

'9%6XE'HOD\HG

The subtitling was not presented at the correct time. This may be due to errors in the PTS or
the complexity of the encoded data. Warning is cleared when a page is displayed on time

'9%6XE/YOQRWVXS

The coding method is not supported by the decoder. (HW limitations)

Содержание TT1200 MPEG2-DVB






























































Отзывы: