![TANDBERG MXP F8 - Скачать руководство пользователя страница 209](http://html1.mh-extra.com/html/tandberg/mxp-f8/mxp-f8_administrators-manual_3624019209.webp)
MENU ADDRESS
SETTINGS DESCRIPTION
INFORMATION
PRODUCT
Control Panel >
Network >
ISDN >
or
ISDN, External, Leased E1/T1 >
H.331 SETTINGS
H.331
The H.331 Broadcast Mode decides the negotiation quality, dependent on if there is a one-way or two-way
communication.
ON:
Used when broadcasting a videoconference from one site to many others, e.g. via satellite, where
there is no possibility to negotiate quality between the receivers and the originator due to one-way
communication.
OFF:
Standard two-way communication with quality negotiation between both sides.
Systems
with ISDN-
BRI or
ISDN-PRI
Control Panel >
Network >
LAN Settings >
IP SETTINGS
IP PROTOCOL
The Internet Protocol (IP) settings are used for communicating data across a network.
Set which Internet Protocols are supported.
IPV4:
IP version 4 supported.
IPV6:
IP version 6 supported. IP Address, IP Subnet Mask, and Gateway will be disabled.
BOTH:
Both IP version 4 and IP version 6 supported.
RESTART SYSTEM AFTER CHANGES
Changes in IP Settings menu will have no effect until the system is
restarted.
All MXP
systems
Control Panel >
Network >
LAN Settings >
IP SETTINGS
IP ASSIGNMENT
DHCP (Dynamic Host Configuration Protocol) can be selected when a DHCP server is present.
Note that for IPv6, the DHCP server is used for NTP and DNS Server Addresses.
DHCP:
The system’s adresses are automatically assigend by the DHCP server. Thereby the IP-address, IP-
subnet mask and Gateway are not used and grayed out.
STATIC:
The system’s IP-address, IP-subnet mask and Gateway must be specified in the respective address
fields.
Options available via DHCP
•
IP Address
•
Subnetmask
•
Gateway
•
DNS servers
•
NTP server
•
SIP server
•
MTU size, DHCP Option 26 (from F6)
•
External Manager
1.
If the DHCP Option 242 is returned in the DHCP response from the DHCP server the system will
interpret this as the External Manager address to use.
2.
Normally the External Manager Address will be the TMS address.
RESTART SYSTEM AFTER CHANGES
Changes in IP Settings menu will have no effect until the system is
restarted.
All MXP
systems
D14033.06—AUGUST 2010
209
MXP
Administrator Guide
Contents
Introduction
Getting started
The menu structure
The settings library
Using the system
Physical interfaces
Peripheral equipment
Contact us
Appendices
The settings library