D14128.03—JULY 2009
67
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xConfiguration Video Output DVI [2, 4] Resolution:
<Auto/640_480_60/800_600_60/1024
_768_60/1280_1024_60/1280_720_60/1920_1080_60/1280_768_60/1360_768_60/1366_768_60/
1600_1200_60/1920_1200_60>
Select the preferred resolution for the monitor connected to video output DVI-I 2 or 4. This will force the
selected resolution on the monitor.
Auto: The system will automatically try to set the optimal resolution based on negotiation with the connected
monitor.
Range: 640x480@60p, 800x600@60p, 1024x768@60p, 1280x1024@60p, 1280x720@60p,
1920x1080@60p, 1280x768@60p, 1360x768@60p, 1366x768@60p, 1600x1200@60p, 1920x1200@60p
Example:
xConfiguration Video Output DVI 2 Resolution: 1920_1080_60
xConfiguration Video Output Composite [5] MonitorRole:
<First/Second/
PresentationOnly/Third/Fourth>
The monitor role describes what video stream will be shown on the monitor connected to the output
connector. Applicable only if the monitor configuration is set to dual or quadruple.
First: Show main video stream.
Second: Show presentation video stream if active, or other participants.
PresentationOnly: Show presentation video stream if active, and nothing else.
Third: Use for remote participants (only for quadruple monitor setup).
Fourth: Use for remote participants (only for quadruple monitor setup).
Example:
xConfiguration Video Output Composite 5 MonitorRole: First
xConfiguration Video Output Composite [5] Resolution:
<PAL/NTSC>
Select the preferred resolution for the monitor connected to video output composite 1. This will force the
selected resolution on the monitor.
Range: PAL, NTSC
Example:
xConfiguration Video Output Composite 5 Resolution: NTSC
xConfiguration Video Selfview:
<On/Off>
The Video Selfview setting determines whether or not the main video source (selfview) should be displayed
on screen.
On: Set to On when you want selfview to be displayed on screen.
Off: Set to Off when you do not want selfview to be displayed on screen.
Example:
xConfiguration Video Selfview: On
xConfiguration Video WallPaper:
<None/Growing/Summersky/Custom>
The Video Wallpaper setting determines whether or not a background picture should be displayed on
screen when idle.
None: Set to None if you do not want a wallpaper to be displayed on screen.
Summersky, Growing: Select the wallpaper to be displayed on screen.
Custom: The custom wallpaper is uploaded from the web interface. Open a web browser and enter the IP
address of the codec. Select “Wallpaper” from the menu on top of the screen. Browse for the file and press
the “Upload” button. Toggle once between “None” and “Custom” wallpaper to make the change take effect.
See the Appendices section for further details about the web interface.
Example:
xConfiguration Video Wallpaper: Sum mersky
Contents
Introduction
Getting started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xConfiguration
