D14128.03—JULY 2009
43
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
About xCommand
xCommand type commands instructs the system to perform an
action. xCommand type commands are supplied by the user.
To get an overview of the supported xCommand type commands,
type
?
or
help
after the xCommand:
•
xCom mand ?
•
xCom mand help
To get an overview of all supported xCommand commands with the
corresponding value space, enter
??
after the xCommand:
•
xCom mand ??
When you type a command and
?
or
help
a list of the available
parameters will show. Required parameters are identified by an (
r
)
behind the parameter name.
Example:
xCom mand Camera Ramp
- the result may look like this:
*h xCom mand Camera Ramp
CameraId(r): <1..7>
Pan: <Left/Right/Stop>
PanSpeed: <1..15>
Tilt: <Down/Stop/Up>
TiltSpeed: <1..15>
Zoom: <In/Out/Stop>
ZoomSpeed: <1..15>
Focus: <Far/Near/Stop>
A return result parameter
The command type
The path
Required (
r
) parameter
A list of returned parameters
xCom mand ?
– User Com mands –
OK
xCom mand ??
*h xCom mand Audio Microphones Mute
*h xCom mand Audio Microphones Unmute
*h xCom mand Audio LocalInput Update
InputId(r): <0..65534>
MixerMode: <Auto/Fixed>
AGC: <On/Off>
Mute: <On/Off>
Channels: <1..2>
*h xCom mand Audio RemoteInput Update
InputId(r): <0..65534>
AGC(r): <On/Off>
*h xCom mand Audio Sound Play
Sound(r): <Busy/CallWaiting/KeyTone/Ringing/SpecialInfo/TelephoneCall/VideoCall>
Loop: <On/Off>
*h xCom mand Audio Sound Stop
*h xCom mand Boot
.
.
.
OK
Audio
Boot
Call
CallLog
CamCtrlPip
Camera
Dial
DTMFSend
Experimental
FarEndControl
HTTPFeedback
Key
Phonebook
Presentation
Preset
SStringSend
Standby
SystemUnit
TStringSend
Video
Contents
Introduction
Getting started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
About the API