TANDBERG Codec C90, Руководство системного интегратора

Страница: 94 / 159

D14128.03—JULY 2009
94
Codec C90
System Integrator Guide
Contents Introduction Getting Started Interfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us
xStatus Audio Module [1..n] Connector
States which output connector the audio module with the given ID is attached to.
Value space: <Line_out.1/3>
Example:
xStatus Audio Module 1 Connector
*s Audio Module 1 Connector: “Line_out.1”
** end
xStatus Call
Run this command to see an overview of the call status. The call id can be used later when query for
additional information about the call.
Example:
xStatus Call
*s Call 27 Status: Connected
*s Call 27 Direction: Outgoing
*s Call 27 Protocol: “sip”
*s Call 27 RemoteNumber: “john.doe@company.com”
*s Call 27 CallbackNumber: “sip:john.doe@company.com”
*s Call 27 DisplayName: “john.doe”
*s Call 27 CallRate: 968
*s Call 27 TransmitCallRate: 768
*s Call 27 ReceiveCallRate: 968
*s Call 27 Encryption Type: “None”
*s Call 27 PlacedOnHold: False
** end
xStatus Call [1..n] Status
Status of a call.
Value space: <Dialling/Connecting/Ringing/Connected/Idle>
Example:
xStatus Call 27 Status
*s Call 28 Status: Connected
** end
xStatus Call [1..n] Direction
Direction of the call initiation.
Value space: <Incoming/Outgoing>
Example:
xStatus Call 28 Direction
*s Call 28 Direction: Outgoing
** end
The Audio status,
cont...
The Call status
Contents Introduction Getting started Interfaces About the API
xConfiguration
xCommand xStatus Cameras Appendices Contact us xStatus