D14128.03—JULY 2009
79
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xCommand Camera ReconfigureCameraChain
Reinitialize camera chain. Get info about what camera is sitting in what position in the camera chain.
Example:
xCom mand Camera ReconfigureCameraChain
*r ReconfigureCameraChainResult (status=OK):
*r/end
xCommand Camera TriggerAutofocus
Trigger the automatic focus functionality in the selected camera.
Parameters: Required parameters are marked with (
r
):
CameraId(
r
): <1..7>
Example:
xCom mand Camera TriggerAutofocus CameraId:1
OK
*r TriggerAutofocusResult (status=OK):
*r/end
xCommand Dial
Dial out from the system.
Parameters: Required parameters are marked with (
r
):
Number(
r
): <S: 0, 255>
Protocol: <H323/Sip>
CallRate: <64..6000>
CallType: <Audio/Video>
Example:
xCom mand Dial Number:543210 Protocol:h323
OK
*r DialResult (status=OK):
CallId: 2
ConferenceId: 1
*r/end
The Dial command
The Camera commands,
cont...
Contents
Introduction
Getting started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xCommand