Tandberg Data
Installing Your Tandberg DLT VS160 Drive
2-20
Tandberg DLT VS160 Installation and Operations Manual
3.
Right-click the
My Computer
icon on the Windows
desktop, click
Manage
, then click
Device Manager
.
4.
The DLT VS160 drive should be listed under the "? Other
Devices" item as "QUANTUM VS160 SCSI Sequential
Device."
5.
Right-click the
QUANTUM VS160 SCSI Sequential
Device
listing, click
Uninstall
, and then click the
OK
button to confirm that you want to remove the device.
6.
Click the
Action
button in the upper-left corner of the
Computer Management dialog box or right-click anywhere
in the right-hand pane of the dialog box.
7.
Click
Scan for Hardware Changes
. Windows 2000 now
scans for the DLT VS160 drive. The DLT VS160 drive
appears under "? Other Devices" again.
8.
Right-click the
QUANTUM VS160 SCSI Sequential
Device
listing and click Properties.
9.
Click the
Reinstall Driver
button.
10.
When the Upgrade Device Driver Wizard appears, click the
Next
button.
11.
Click
Display a list...
and then click the
Next
button.
12.
Click the
Tape Drives
item in the list. You may have to
scroll down to see this item.
13.
Click the
Have Disk
button, type the path to the driver you
downloaded in step 2, and click the
OK
button.
14.
Click the
DLT VS Tape Drive
entry and click the
Next
button.
15.
Click the
Next
button to install the driver.
16.
Click the
Finish
button.
17.
Close the Device Properties dialog box.
The drive now appears in Device Manager under Tape Drives,
listed as "DLT VS Tape Drive," and is ready to use.
