Tandberg Data
Installing Your Tandberg DLT VS160 Drive
2-16
Tandberg DLT VS160 Installation and Operations Manual
Note:
If your SCSI host adapter already has a ribbon cable
with an open 68-pin, high-density connector, you can use the
existing cable instead of the cable supplied with your DLT
VS160 internal drive.
5.
Locate the SCSI ribbon cable in the accessories package.
Attach one end of the SCSI ribbon cable to the SCSI
connector on the rear panel of your DLT VS160 Internal
Drive. The SCSI connectors are keyed, preventing improper
connection.
Note:
If the supplied SCSI cable does not fit the connector on
your SCSI host adapter, you either have an incompatible SCSI
host adapter or you need to purchase a cable adapter. Contact
Tandberg Data or your SCSI host adapter manufacturer for
information.
Note:
Refer to page 2-11 to determine if you need to use an
LVD/SE terminator with the SCSI cable.
6.
Attach the other end of the SCSI ribbon cable to the SCSI
host adapter, aligning the colored stripe on the ribbon cable
with pin 1 on the SCSI host adapter’s connector.
