Tanda AQUATOP, Руководство по установке, Страница: 89 / 239

MAN-AT-D Manual Aquatop (2019) 15
Overflow set
If you have an overflow pool, you can use the overflow set to avoid the cover floating over the edge
of the pool. This set contains guiding wheels to install at both outsides underneath the first slat (in-
line with the outside of the cover) and the stainless steel brackets to be equally devided over the full
length of the cover.
Remark :
The first slat (including the guiding wheels) cannot be rolled on the cover in following situations :
- Underwater mount in the pool floor (underwater panel)
- Underwater mount on the pool floor (underwater bench)
The overflow set cannot be used for every kind of edge/coping stone (see sketch below).
ATTENTION : The overflow set is never a guarantee to prevent your cover (whenever closed) from
blowing off the pool in case of heavy (side) winds, the only correct solution would be to
(automatically) lower the pool water level. This also offers a positive influence on the evaporation
over the overflow channel.