Tanda AQUATOP, Руководство по установке, Страница: 17 / 239

MAN-AT-A4 Manual Aquatop (2019) 1
A4 - Constructional preparations: Underwater mount – On pool floor
General:
•
Level control is necessary to install and use an automatic slatted cover. Provide an
overflow and a refilling system to guarantee the correct level in case of a skimmer
pool.
•
Do not place any obstacles in the back or side walls which can interfere with the slats.
For example: skimmer covers, ladders, etc…
•
Roman ends, rectangular ends and other particular shapes cannot always be rolled up
completely.
•
To comply with the European standard EN_16582-1/2/3, you need to cover the rollo
cover pit.
•
A bench is necessary to comply with the European standard EN_16582-1/2/3!
•
Standard width of the bench is B2 – 14mm. The bench should be mounted
symmetrically to limit the gap between the bench and the side walls of the pool. Width
of the gap/side ≤ 8mm.
•
The bench should not be used as an entry tot he pool. If you decide to use the bench as
an entry to the pool, you need to comply with the European standard EN_16582-1
•
Not compatible with prefab liner because of the radius in the corners.
•
In case of skimmer: Thickness max 10mm rounded (d1)
•
In case of overhanging coping stone: min. 30mm between copingstone and waterlevel
(d2)
Concept:
•
The Rollo cover is mounted on the pool floor.
•
Drive: external electric, external hydraulic or in-roller motor.
Options:
•
See c
hapter “
O4 – Finishing: Underwater mount – On pool floor: Bench
”
•
The Rollo cover can be covered with a single piece fibreglass bench (< 7m).
•
The bench will be made in 2 parts when poolwidth exceeds > 7m.