Tanda AQUATOP, Руководство по установке, Страница: 19 / 239

MAN-AT-A5-1 Manual Aquatop (2019) 1
A5-1 - Constructional preparations: Underwater mount – In pool floor
General:
•
Level control is necessary to install and use an automatic slatted cover. Provide an
overflow and a refilling system to guarantee the correct level in case of a skimmer
pool.
•
Do not place any obstacles in the back or side walls which can interfere with the slats.
For example: skimmer covers, ladders, etc…
•
Roman ends, rectangular ends and other particular shapes cannot always be rolled up
completely.
•
To comply with the European standard EN_16582-1/2/3, you need to cover the rollo
cover pit. The gaps between the cover and the pool wall and the gaps between the
different cover panels should not be bigger than 8mm.
•
Not compatible with prefab liner because of the radius in the corners.
•
In case of skimmer: Thickness max 10mm rounded (d1)
•
In case of overhanging coping stone: min. 30mm between copingstone and waterlevel
(d2)
Concept:
•
The Rollo cover is mounted in a pit integrated in the pool floor.
•
Drive: external electric, external hydraulic or in-roller motor.
Options:
•
See chapter “
O5-1 – Finishing: Underwater mount – In pool floor: Fixed
underwater panel
”
•
The Rollo cover can be covered with PVC plates or a fiberglass moveable panel.
•
Different beams and supports are available, without the panel.
Target values:
(Valid for pools till 6m width – exact diameter can be found on the quotation of T&A
and the first page of the manual of each project)
Cover length (m) (stairs incl.) 6 8 10 12 14 16 20 25
Diameter (
ø
) Rollo cover ( mm)
Slat dimension : 60 x 14 mm
420 480 520 580 610 640 705 780
Diameter (
ø
) Rollo cover ( mm)
Slat dimension : 67,5 x 16,5 mm
440 500 540 600 640 680 720 820