Tanco A Series, Руководство оператора, Страница: 18 / 72

Tanco Autowrap - A200 EH
Operator’s Manual
17
Support Rollers
To allow for stability of the bale during the wrapping process the support rollers can be adjusted
different sized bales. It is important that the support rollers are adjusted so that the bale is in the
middle of the table. When the bale is on the table (See Fig. 6.9) the distance between the ends of the
bale and the support rollers (D) should be <50mm.
Support Roller Adjustment (See Fig. 6.10)
The support rollers have three adjustment positions (3). In order to move the support roller (1) disconnect
the locking bolt (2) from its original position and move the roller to adjust to distance D. Once the roller is
in its desired position fix it in place with the locking bolt (2).
6. MACHINE SETUP
D D
Fig. 6.9
B
3
2
1
Fig. 6.10