manualshive.com logo in svg

Tanco A Series, Руководство оператора, Страница: 11 / 72

Поделиться
Скачать
Tanco A Series Скачать руководство пользователя страница 11

Tanco Autowrap - A200 EH

Operator’s Manual

10

Special Safety Instructions

1. 

Stop engine of the tractor before working on machine.

2. 

Use the Safety Bar (1) to prop up the Tip Frame (2) before attempting to carry out work in 

 

this area. (See Fig 4.1)

Fig 4.1 Propping Tip Frame

4. SAFETY PRECAUTIONS

Operating Safety Instructions

1. 

Operators should have their hands on the controls at all times when the machine is in use.

2. 

Autowrap control unit and level controls must remain in the tractor cap at all times.  The operator must at no time leave the tractor cab when the machine is in motion.

3. 

Keep onlookers clear of machine at all times. Danger zone is 5 meters.

4. 

Beware of rotating turntable and all moving parts.

5. 

If not operated correctly the bale could fly off the turntable.  The end support rollers must always be fitted.  Do not exceed recommended turntable speed of 30 rpm  Misshape 

 

en bales combined with excessive turntable can be dangerous.

6. 

Care must be taken when tipping bales from the machine on sloping ground and during subsequent handling to ensure that they do not roll, thus causing hazard.

THINK OF YOUR PERSONAL SAFETY AND THAT OF OTHERS AT ALL TIMES

Содержание A Series









































































Отзывы:

Нет отзывов