Tanco A Series, Руководство оператора, Страница: 16 / 72

Tanco Autowrap - A200 EH
Operator’s Manual
15
6. MACHINE SETUP
Mounting of Plastic Film (See Fig. 6.6 & 6.7)
When loading a plastic roll, first ensure the Top Cone is pushed up to the latched
position, then push back the Dispenser Insert until held in position by the
Bottom Latch.
Place the Roll on the Bottom Cone and release the Top Latch.
BEWARE OF FINGERS!
Pull the film between the rollers on the Dispenser Insert in the direction of the
arrow, as shown below. (See also the sticker on the dispenser).
Release the Bottom Latch and allow the rollers to lie against the roll of film.
Pull the film from the roll and tie it to the bale.
Bottom Cone
Bottom Latch
Dispenser Insert
Top Cone
Top Latch
Fig. 6.6