Tanco 1400 Autowrap Скачать руководство пользователя страница 62

Страница: 62 / 132

Tanco Autowrap - 1400

Operator’s Manual

11. Maintenance

Periodic Maintenance

Bearings

All ball-bearings are packed with grease, and do not need any more maintenance.

Pre-Stretchers

If the machine is in daily use, the Gears under the plastic cover on the dispenser should be greased when

needed.

Cutters / Film Holders

The cutter / film holder is pre-adjusted from the factory and does not need further adjustments. When

replacing spare parts, it is necessary to adjust it. The springs for the U-shaped slot shall be adjusted so that

they are almost completely squeezed together when the cutter-arm is all down.

Cleaning

The machine should be cleaned and oiled regularly and at the end of the wrapping season.

When using high pressure washing apparatus, care must be taken with the electrical installation.

Also make sure that water is not sprayed directly into the bearings, etc. Keep the control box protected

from rain and water. If necessary use compressed air to dry electrical components.

Hydraulic Cylinders

Make sure that all hydraulic cylinders are closed when storing the machine.

Quick Couplers

Ensure that the quick couplers are kept clean and apply the dust caps after use.

Содержание 1400 Autowrap





































































































































Результаты поиска

Содержание 1400 Autowrap

Отзывы:

Tanco 1400 Autowrap, Руководство оператора, Страница: 62 / 132

Результаты поиска

Содержание 1400 Autowrap

Отзывы: