manualshive.com logo in svg

Tanco 1400 Autowrap, Руководство оператора, Страница: 52 / 132

Поделиться
Скачать
Tanco 1400 Autowrap Скачать руководство пользователя страница 52

Tanco Autowrap - 1400

Operator’s Manual

51

Description of Hydraulics

The Control Valve (See Fig. 20) uses a ‘Master Valve system; 

so to operate any function the master valve plus the service valve 

for that function is powered. For troubleshooting purposes it is useful 

to note on the control valve that, energizing a solenoid on top of the 

valve gives pressure out the bottom port of that section on 

valve and vice versa.

Open & Closed Center Hydraulics

The 1400 hydraulic system can be set up for tractors with 

Open or Closed Center Hydraulics.

Open Centre Hydraulics  

Most tractors have a hydraulic system that gives a continuous 

output which flows through the valve on the machine and back 

to tank when no function is operating (Open center).

Note:

The TANCO AUTOWRAP 1400 is set-up for open centre on leaving the factory.

Close Centre Hydraulics

Some tractors (John Deere) have a hydraulic system that require the valve on the machine to allow no flow when 

no function is operating (Closed Center). The hydraulic valve can easily be configured to operate in this way.

Tower Valve

Arm Control Valve

Roller Stop Valve

Control Valve

Junction Box

Oil Filer

Fig. 20

9. Electro-Hydraulics

Содержание 1400 Autowrap





































































































































Отзывы:

Нет отзывов