manualshive.com logo in svg

Tanco 1400 Autowrap, Руководство оператора, Страница: 17 / 132

Поделиться
Скачать
Tanco 1400 Autowrap Скачать руководство пользователя страница 17

Tanco Autowrap - 1400

Operator’s Manual

16

1400 Control Box 

The control unit consists of the emergency stop button, a control cable, a 

fuse and a battery cable.  The control unit should be attached to a suitable 

place in the tractor cab using the suction pad provided.

The Remote Control Unit is not Shock Proof, make sure that is fastened to a 

soft pad that secures a non-vibratting foundation.

Electrical Connection

The electric supply for the machine’s remote control and electro-hydraulic 

components must come directly from the tractors’ 12 volt battery.

The electric wires from the battery must have an area measurement of min. 

2,5 mm2. Connection to other contacts on the tractor can cause risk of 

malfunction and is not  recommended.

Note:

Brown leader goes to the Battery’s Possitive Pole

Blue leader goes to the Battery’s Negative Pole 

6. Machine Setup

Содержание 1400 Autowrap





































































































































Отзывы:

Нет отзывов