Tanco 1400 Autowrap Скачать руководство пользователя страница 18

Страница: 18 / 132

Tanco Autowrap - 1400

Operator’s Manual

Hydraulic Connection

The hydraulic hoses between machine and tractor are equipped with 1/2” ISO Male Quick-Couplers.

Ensure the oil pressure has been discharged before you connect the oil hoses using the tractor’s

hydraulic lever.

To make sure that the bale wrapper works properly, the tractors’ oil pressure has to be at least 180 bar.

The oil flow should be 15 - 25 liters per minute. The return pressure on the return must be as low as

possible, and not exceed 10 bar. This should be measured with a gauge. It is recommended to use one

single-working hydraulic outlet and arrange a free return circuit to the oil tank.

If you are unsure of what oil pressure the tractor gives, or what oil pressure the bale wrapper receives,

please contact your machinery dealer. Generally all tractors have got some counter-pressure in their

hydraulic return systems. Some tractors have more than others.

Note:

The Hose with the Red Cap shall be connected to pressure ‘P’ and Hose with Blue Cap to the return ‘T’.

6. Machine Setup

Содержание 1400 Autowrap





































































































































Результаты поиска

Содержание 1400 Autowrap

Отзывы:

Tanco 1400 Autowrap, Руководство оператора, Страница: 18 / 132

Результаты поиска

Содержание 1400 Autowrap

Отзывы: