manualshive.com logo in svg

Tanco 1400 Autowrap, Руководство оператора, Страница: 21 / 132

Поделиться
Скачать
Tanco 1400 Autowrap Скачать руководство пользователя страница 21

Tanco Autowrap - 1400

Operator’s Manual

20

Check List:

Before using the machine it is recommended to follow this check list:

1. Make it a habit to discharge the oil-pressure before connection or disconnection of the hydraulic 

hoses. (By operating the hydraulic control lever inside the tractor). (Use the tractors hydraulic control 

lever).

2. Return-oil should be led directly to tank. Beware that if the counter pressure is too high, the security 

valve on the main block will release some oil. (See Chapter 9).

3. Hose with BLUE CAP = RETURN OIL.

4. Hose with RED CAP = PRESSURE.

5. Tie up loose hoses and Connection Cables so that no squeeze damages occur.

6. Remove the locking bolt that holds the wrapping arm to the frame during transport.

7. Start the tractor and try out the functions. A bale is not required for this test.

8. Check all connections, hoses and couplings. If there is any oil-leakage, it should be rectified 

immediately.

6. Machine Setup

Содержание 1400 Autowrap





































































































































Отзывы:

Нет отзывов