LD-G-43
t
a
ms elektronik
Setting the motor characteristic curve (continuation)
Name
No.
Input values
(Default)
Remarks and tips
Alternative
characteristic curve
(only for mode 28
speed steps)
67
68
69
...
94
0 … 255
= Speed table for alternative speed
characteristic.
A specific motor voltage is assigned to each of
the 28 speed steps.
0 = voltage of "0
255 = maximum voltage
Note: An example of an alternative characteristic curve is set in the default values of CVs 67 – 94.
5.4. Function mapping
The assignment of the actions controlled by the decoder
switching the function outputs on and off
(de)activation of the special functions
Uninterruptible power supply (UPS)
Start/Stop with a function (Stop with F)
Shunting gear (SG)
Acceleration and brake delay (ABD)
to the functions is carried out according to RailCommunity standard RCN-227. Note: The use
of the function mapping is not possible with pure Motorola control units.
Basic settings for using the function mapping
To get access to the corresponding memory area (the so-called "page"), the values for
"Function mapping" must be set in CV 31
and
32 (= default values).
Name
No.
Input values (Default)
Remarks and tips
Index for
higher pages
31
0 ... 255 (0)
Function mapping active
0
32
0 ... 255 (42)
Function mapping active
42
Configuration variables for function mapping
According to RCN-227, eight configuration variables (CVs) are assigned to each function (F0 to
F28): four each for forward ("f") and reverse ("r"). Six of these are used for the LD-G-43
locomotive decoder (3 for forward and 3 for reverse):
2 CVs for the outputs (F0f, F0r, AUX1 ... AUX6): Here you set which outputs are switched
with the function.
4 CVs for the special functions: Here you set separately for each driving direction with
which function the special functions are activated / deactivated.
Switch-off function: Here you can define a function with which you can switch
off
the
actions assigned to the function when switching
on
. The value "255" determines that the
actions are switched off with
no
function.
42 | Configuration variables and registers
Содержание LD-G-43
Страница 66: ...LD G 43 tams elektronik 66 ...
Страница 67: ...tams elektronik LD G 43 67 ...
