Tally Dascom DL-310 Скачать руководство пользователя

Страница: 2 / 101

Tally Dascom DL-310 User Guide V1.0

Important Safety Instructions (English)

Read the following instructions thoroughly before starting up your printer.

•

The device and mains-socket must all times be easily accessible.

•

Never carry out maintenance or repair work yourself. Always contact a qualified service
technician.

•

Keep this user guide in a place which is easily accessible at all times.

•

Place the printer on a solid and even base so that it cannot fall.

•

Never place the printer in the vicinity of inflammable gas or explosive substances.

•

Ensure the printer is connected to a socket with the correct voltage.

•

Always disconnect the printer from the power before opening the device to perform
maintenance work or remedy errors.

•

Do not expose the printer to high temperatures, direct sunlight or dust.

•

Keep all liquids away from the printer.

•

Protect the printer from shock, impact and vibration.

•

Make sure that both the printer and the computer is switched off before connecting the data
cable.

•

The print head will become very hot during printing; avoid contact with the print head after
printing has finished.

•

Do not perform any operation or action in any way other than those provided in this manual.
When in doubt, contact your dealer or your customer support.

Содержание DL-310






































































































Результаты поиска

Содержание DL-310

Отзывы:

Похожие инструкции для DL-310

Бренды по названию

Популярные бренды

Tally Dascom DL-310, Руководство пользователя

Результаты поиска

Содержание DL-310

Отзывы:

Похожие инструкции для DL-310

Бренды по названию

Популярные бренды