VOIP-600
Series Phone
Configuration / Operation Manual
Page
29
of
94
Rev. 9/17/2014
Copyright 2014 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.6.2. Hook Switch
The Hook switch configuration page configures the numbers to be dialed when the handset goes off-hook.
This configuration page is only available for the 0BH device mode.
Login → Devices → Hookswitch
Figure 13 Hookswitch
To configure the Hook switch:
1.
Click the drop-down menu to assign a
Number List
. Phone Numbers from the Number List are dialed in
round robin fashion when the handset goes off-hook.
2.
Select the
Call Priority
. This parameter assigns a priority to the call that is generated when the
handset goes off-hook. A call with a “Call Priority” of 1 terminates all the existing calls having the call
priority in the range of 2–10.
3.
Select the
Network Priority
5
to assign a network priority to the placed call. The value is utilized by
the network to prioritize the voice traffic. The default value is 46.
4.
Click
Apply
to save settings.
5
Network priority is the same as Differentiated Services Code Point (DSCP). Do not change this unless absolutely required as it might
degrade the voice quality of the phone.
1
2
4
4
3
