VOIP-600
Series Phone
Configuration / Operation Manual
Page
30
of
94
Rev. 9/17/2014
Copyright 2014 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.6.3. Keypad
The Keypad configuration page allows administrator to configure the keypad of the phone for “normal” or
“speed dial” mode. This configuration page is only available for phones with a keypad.
Login → Devices → Keypad
Figure 14 Keypad – Normal Dial Mode
To configure the Keypad:
1.
Select the dial mode –
Normal Dial Mode
or
Speed Dial Mode
. Normal Dial Mode allows for manual
dialing of an “analog style” phone number. If the phone is off-hook, dialing numbers on the keypad will
place a call after the local inter-digit timer expires (Refer to 4.5.4 Call Parameters: Local Inter-digit Timer).
2.
For Speed Dial Mode, enter the number for each keypad button (0–9). The number can be in the
format of an analog phone number, an IP address, an alias, or a number@domain. When the phone
is taken off-hook, a call can be placed directly to the number by pressing the corresponding keypad
buttons.
3.
Click
Apply
to save settings.
3
4
1
2
