VOIP-600
Series Phone
Configuration / Operation Manual
Page
44
of
94
Rev. 9/17/2014
Copyright 2014 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
iii. Select
Guard Answers Call
to play the voice message to remote side when the remote phone
answers the call.
iv. Select and enter the
Key Code sequence
entered by remote side to play the voice message to the
remote side when the corresponding key sequence is entered by the remote side during an active
call.
3.
Select Looping –
Yes/No
to loop the voice message until the “stop message” event occurs.
4.
The selected voice message stops playing on selection of the following events:
i. Select
Auxiliary Input Activation/Deactivation
events to stop playing the current voice message
on activation/deactivation of an Auxiliary Input Device.
ii. Select and enter the
Key code sequence entered by Remote Side
to stop playing the voice
message to remote side when the corresponding key sequence is entered by the remote side during
an active call.
5.
Click
Apply
to save settings.
Note
You cannot use the same event to activate and deactivate the same voice message.
6.
