Talaris Nvision, Руководство пользователя

Страница: 71 / 84

Model: Nvision Optional Remote Display
TP05613010 Rev. 02 Page 63 of 74
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
7 Optional Remote Display
7.1 Connecting A Remote Display
The remote display can come with a mounting bracket. Just push the connector
into the corresponding section on the base of the remote display. You can now
attach the bracket with the display any where you require it to be.
If you do not use the bracket, then just place the remote display in the best
position for the customer to see it.
When connecting the Remote Display to the machine.
Please make sure the Nvision is switched off first from the main supply.
The Remote display has it’s own power supply as shown in (figure 2).
First plug in the remote display cable into the port shown in (figure 1) and also into
the back of the remote display (figure 2) above
Now plug in the DC power cable connector into the remote display (figure 2).
Now connect the remote display power supply to the line voltage using one of the
4 international plug connectors supplied.
You can now switch the machine back on.
Cable connection points
Bracket
DC power input
Display power supply
(Fig 2)
Remote Display
(Fig 1)
(Fig 3)