Takeuchi 190100003, Руководство оператора

Страница: 105 / 305

2-53
CONTROLS
ACCESSORIES
(6) Circulation and Ventilation switches
Use these switches to select either
Circulation or Ventilation.
Pressing either switch (6) will display the
current air flow state on the LCD.
The Circulation or Ventilation will be
automatically selected while in the automatic
operation.
Circulation
The air inside the cab
circulates without
drawing air from
outside.
Used when quickly
cooling or heating the
cab inside or when
the outside air is dirty.
Ventilation
Outside air is drawn
into the cab.
Used when clean air
is required or when
defogging.
(7) LCD
The current settings for temperature, fan
speed, outlet mode, Circulation/Ventilation,
and AUTO are displayed on the LCD (7).
(8) Air conditioner switch (A/C)
Use this switch to turn on or off the air
conditioner (cooling and heating with
dehumidifying).
Press the A/C switch (8) to turn on the air
conditioner. The will come on to indicate it
has been turned on.
Press the switch (8) again to turn off the air
conditioner. The will go out.
Note that the fan must be operating at the
time the A/C switch is pressed.
Note: The air conditioner will not function if
the temperature in the cab is low (3°C (38°F)
or lower).
OUTLETS
Move the louvers up or down or left or right
to adjust the air flow direction and volume.
OPERATION
Heating with dehumidifying (in cold climates
or high humidity)
Arrange the louvers of the defroster outlet so
that air can be directed to the front window.
The dehumidified warm air from the defroster
is used to prevent frosting on the front
window.
1. Press the fan switch (2).
2. Press the MODE switch (4) until the is
displayed on the LCD (7).
3. Press the A/C switch (8).
4. Press the TEMP switch (3) to set the
temperature to between 25.0 and 32.0°C
(77 and 90°F).
5. Use the fan switch (2) buttons to set the
desired fan speed.
6. Press the Ventilation switch (6) to select
Ventilation.
Select Circulation for quick cooling or if the
outside air is dirty.