Takara Belmont RS III AXIS, Руководство по установке

Страница: 16 / 28

Caution
2
1
Mounting the Maintenance Cover
Mounting the Lower-front Chair Cover
16
Attach cover
４
Screws to be used (supplied with the shampoo unit):
Truss-head tapping screw (M4 x 16)
Truss-head screw (M5 x 12) (With PE gasket)
(1) Mount the truss-head tapping screws to the upper part
(speed nut portion) of the lower-front chair cover
(two locations).
(2) Mount the lower-front chair cover to the shampoo unit
with the truss-head screws (two locations).
The maintenance cover can be mounted simply by
hooking the three latches on the main unit.
First, hook the latch on the upper side, and then hook
the two latches on the lower side.
2
Mounting of the Chair to the Shampoo Unit
1
Mounting the Armrest Pad
＜ＥＬＩＴＥ＞ ＜ＥＬＩＴＥ＞
Mount the armrest pad with truss-head screws
(four locations).
Screws to be used (supplied with the seat set):
Truss-head screw (M5 x 30)
See Section [1] on page 13.
Bolts to be used (supplied with the chair):
Hexagonal head bolt (M8 x 55)(With spring washer and plain washer)
Lower chair cover
Speed nut
Truss-head screw
Truss-head tapping screw
The side with a
cutout: UP
Check that the maintenance cover is attached securely by
the three latches. If the cover is not attached securely,
there is a possibility that water may enter the inside,
resulting in a system failure.
Latch
Latch
Latch
Maintenance cover