Takara Belmont RS III AXIS, Руководство по установке

Страница: 15 / 28

3
Mounting the Seat
2
Mounting of the Chair to the Shampoo Unit
1
Mounting the Backrest and Armrest Pad
＜ＣＯＭＦＯＲＴ＞ ＜ＣＯＭＦＯＲＴ＞
15
See Section [1] on page 11.
(1) Loosen the screws holding the square pipe
(four locations). (A)
(2) Push the seat in by sliding it so that the waist panel
iron plate is sandwiched between the square pipes
and the seat. (See the drawing on the right.)
(3) Secure the square pipes and the waist panel iron
plate with pan-head machine screws (M8 x 30)
(four locations). (B)
(4) Secure the sheet and the waist panel iron plate with
pan-head machine screws (M6 x 15)
(two locations). (C)
(5) Tighten the screws for the square pipes which
loosened first (four locations). (A)
(1) Mount the backrest with pan-head machine screws
(three locations).
(2) Mount the armrest pad with truss-head screws
(four locations).
Screws to be used (supplied with the seat set):
Pan-head machine screw (M6 x 25)
Truss-head screw (M5 x 30)
Ａ
Ｂ
Ｃ
Square Pipe
Waist Panel Iron Plate
Square Pipe
Sheet
※
Pinch the guides of the waist panel iron plate with the two
square pipes from the outer side.
Guide
Cross Section of the Installed Seat
Screws to be used (supplied with the seat set):
Pan-head machine screw (M8 x 30)
Pan-head machine screw (M6 x 15)
Waist Panel Iron Plate