7
The synthetic upholstery of this product may be stained by coming into
contact with fabric, belts or other such attire. In order to avoid infiltration
by plasticiser when colour has been adhered, apply a solution of neutral
detergent diluted by about 10% to a soft towel and wipe off the colour as
soon as possible. After wiping off the colour, wipe with water, and then
wipe the area dry.
Adherence of fabric dyes
・
Contact with items such as other plastic parts, paints, solvents, and
adhesive tape may cause changes to the surface sheen, cracking,
deformation, or peeling.
・
Contact with newspaper or printed materials may cause colour staining.
・
Contact with printed areas such as T-shirts, jeans, etc. may cause
colour transfer of dyes, etc. to the leather.
・
Contact with benzene, nail polish remover, alcohol, or oil may cause the
surface to discolour, dissolve, harden, soften, peel, extract plasticiser,
or experience changes to its shine.
・
Using bleach or sheets that use bleach may cause discolouration or
changes to shine.
・
When placed next to a source of excessive heat such as an iron or
heater, deformation or discolouration may occur.
・
Shield the product from direct sunlight with a curtain, etc. Surface
changes, shrink, discolour, fade, etc. may occur.
・
Heavy objects placed on the upholstery for long periods of time may
leave an impression, and wrinkles that may be permanent.
Colour deterioration and staining caused by contact
4 Precautions for Handling of Synthetic Leather
The casting parts of this product are manufactured by
hand.
Casting (armrest frames, legrest frames, footrest,
headrest frames, etc.) used for the external parts are
hand-made one by one. The surface (casting surface) of
the casting may have irregularities or spots that are unique
to the manufacturing method. Please understand that it is
a manufacturing process method which takes advantage
of the material characteristics of this chair. Quality is
inspected thoroughly, so there is no problem in terms of
function.
Cast-metal parts [MODEL NO. 225]
The leather upholstery of some product models is with
pleats for design purposes. The pleats may vary in width,
length and intervals due to the manufacturing process.
For products that use soft cushioning materials, we use
upholstery that has been considered for the comfort and
plumpness of the chair. Additional pleats and surface
waviness may develop depending on the demands and
conditions of use.
Upholstery
5 About this Product
Do NOT use this product for any purpose other than the practices and services typically offered in hairdressing and
beauty salons.
Before using this product, read the installation and operating instructions and the operating instructions of the processor
or shampoo equipment used in combination, and use them safely.
When combining with the processor, be careful that the chair and the processor do not come into contact with each other.
Continued use may cause discolouration, deterioration, deformation or degradation of the leather.
Содержание Manual Barber chairs
Страница 19: ...19...
