Takara Belmont Manual Barber chairs, Инструкция по установке и эксплуатации

Страница: 5 / 20

5
2 Safety Precautions (adhere to these precautions at all times)
CAUTION
●
Precautions for moving the product
When moving a chair, lay a mat under it and pull the mat, as
shown in “Moving the Chair” (page 12). Do NOT drag the chair
directly on the floor. The floor may be scratched, and the chair
may stop working or become damaged.
●
Pay attention when rotating the chair top.
When rotating the chair top, always make sure that no one is
around it (especially around the footrest) and that there are no
objects, and that the power cord is not caught in the adjuster of
the footrest. If it hits a person or an object, it may cause injury or
damage to a chair or an object. Also, do NOT rotate the backrest
while it is laying down. Doing so may damage the chair or cause
injury.
●
If the floor is wet, be sure to wipe it up as it could cause injuries.
If the floor is wet after shampooing, wipe it off immediately. Not
doing so may cause deterioration of the floor surface or failure of
the chair base.
●
Do NOT put a wet towel on the chair. Mould may grow or the
leather upholstery may discolour, change in properties, or
deteriorate.
Installing and moving the product
●
Do NOT raise or lower the chair top in long strokes or with a
large action.
Failure to follow this instruction may cause damage to the
product or injury.
●
Do NOT use the product with the plating peeled off.
If plating on the metal or plastic parts comes off, immediately
contact your local Takara Belmont dealer and replace it.
Continued use may result in injury.
●
Do NOT bump, knock or hit the product.
Failure to do so may result in damage to the footrest, armrests,
etc., or injury due to malfunction or damage.
●
Do NOT hook or pull any cords such as a dryer on the underside
of chair top, the armrests, or the backrest. Failure to follow this
instruction, the chair or dryer may be damaged, or resulting in
electric shock or injury.
●
Do NOT allow the customer to adjust the angle of the backrest.
Adjustment during treatment or operation with excessive force
may cause injury or chair damage.
●
Avoid any impact on the chair, reclining handles, chair base
cover, etc. Otherwise, it may cause injury or malfunction of the
chair. Also, do NOT hit or push the chair base cover or other resin
parts with force. Doing so may cause breakage or deformation of
the cover.
●
Carefully adjust the length of the adjuster.
Adjust the length of the adjuster so that it will not catch a power
cord or rub against the floor when you turn the chair top, and
that the chair will not fall when the customer sits down.
●
Do NOT apply excessive force to the tip of the backrest or
armrest when rotating the chair or moving the chair. The chair
may be deformed or damaged.
●
Do NOT rotate the chair by holding the reclining handle or the
headrest. Otherwise, damage to the product or injury may result.
●
Take extra care when handling the headrest.
When attaching, removing, adjusting or flipping the headrest, be
extra careful to avoid injury. Your fingers may become caught or
cut on the metal parts.
During use and maintenance