Takara Belmont Manual Barber chairs, Инструкция по установке и эксплуатации

Страница: 9 / 20

9
7 How to Install
Before installing the chair base, ensure there is enough space
for the chair top to rotate. The figure below shows the rotation
range of the chair top.
Chair installation space
Rotation
centre
Twice length from the chair
rotation centre to the tip of
the footrest
・
Place the chair on a flat and solid floor. The chair may tip
over if the chair is installed on a floor that is tilted 5 degrees
or more. Also, there is a risk of chair rattling or abnormal
noise due to the floor inclination or irregularity on the floor
surface.
・
When rotating the upper part of the chair, be sure that no
one is around (especially around the footrest) and there are
no objects. If it hits a person or an object, it may cause injury
or damage to a chair or an object.
・
Avoid exposure to direct sunlight and excessive heat. It
may cause discolouration, deterioration or deformation of
the leather. Do NOT use the product on a heating device.
Failure to observe this warning may cause fire.
・
Do NOT use the product outdoors. Doing so may cause
malfunction or damage.
CAUTION
8 Attaching the Chair Top to the Chair Base
Note: the drawing is an example.
(1) Step on the foot pedal, raise the chair base ram to the
highest position, and lock the chair base rotation.
This makes the assembling work easier. (2) Fit the pin on top of the ram into the flange groove.
Check the chair top does not wobble.
CAUTION
Ram
Ram
Pin
Pin
Flange
Flange
Fit the pin on top of the ram into the flange groove.
Groove
Groove
Foot pedal
Chair base
If the chair is used without the pin inserted firmly into the groove, the
chair may fall, resulting in damage of the chair or falling accident.