18
15 Standard Period of Use
●
The standard period of use of this product is seven years.
●
The standard period of use is "a guide for the standard
period that this product can be used properly from a
safety perspective, when conducting appropriate
maintenance and inspections (including parts
replacement) for the standard usage conditions for each
product.”
Note: this is not a warranty period. The "standard period"
will vary depending on the environment and frequency of
use of the customer. For maintenance after the standard
period of use has expired, contact your local Takara
Belmont dealer.
16 Consumables
Consumables are parts that are expected to wear,
deteriorate, change in external appearance, or be damaged
by use. Please note that repair or replacement of these
parts is not covered by warranty, and a fee will be charged.
(Note: the degree and timing of wear, deterioration, and
damage may vary depending on the environment and
conditions used by the customer.)
If the product is worn or has deteriorated significantly or if
it is damaged, inspections or parts replacement will be
required. Contact your local Takara Belmont dealer
immediately.
Consumables (the following parts are not covered by the
warranty and will be charged)
・
There are no specified parts for this product.
In addition, the following exterior parts are not covered by
the warranty, including scratches, dirt, deterioration,
fading, and rust on the exterior.
・
Upholstered parts (backrest/seat/armrests), footrest
17 Maintenance Service Parts and Replacement Parts
We hold consumables and parts for the product for ten
years after the discontinuation of the product.
Note: the maintenance service parts refer to the parts that
are required for repairing or restoring the product's
physical integrity or functions to the intended optimum
condition.
18 Disposing of this Product
When disposing of this product or replacement parts, treat
them appropriately in accordance with the applicable laws
and regulations at the time of disposal in your country.
19 Specifications and Product Dimensions
For other specifications and product dimensions, please refer to the separate document for each product.
1350N (135kgf)
Operating environment
Operating temperature: 10 - 40°C
Operating humidity: Up to 95
%
(with no condensation)
Maximum load
(human-body load)
Содержание Manual Barber chairs
Страница 19: ...19...